Legrand BUS/KNX 048918
Legrand BUS/KNX 048918
940,92 RON
Oferte pentru produsul Legrand BUS/KNX 048918
Ofertele pentru produsul
Caracteristici, descrierea produsului - Legrand BUS/KNX 048918
Galerie - Legrand BUS/KNX 048918
Evoluţie preţ
Puteti obtine informatii privind evolutia pretului
Alerta pret
Serviciul Alerta pret va anunta daca pretul produsului ales scade sub suma precizata.
Pretul minim actual al produsului: 940,92 RON
Descrierea produsului
Caracteristici tehnice
Special presence sensors for work areas
Suitable for meeting rooms, classrooms, open areas, etc.
Ceiling mounted
360° passive infrared and ultrasound detection, range 8 m
IP 20
Consum 0.5 W
Optimum distance between two sensors: 6 m
Fixes directly in suspended ceiling with springs (supplied) or is installed in a 50 mm deep Batibox
Surface mounted on ceiling using accessory Cat. No 0 488 75
Connection by KNX red/black connector
Caracteristici generale
Lighting Management - BUS/KNX sensors
Constantly check for presence and light levels, switching OFF as soon as the natural light level is sufficient Switch ON and OFF automatically
Accurate set-up on site with configuration device
Connected directly to BUS/KNX cable (supplied with tap-off connector)
The detector must be programmed using ETS software
Denumiri similare la Senzor de miscare Legrand BUS/KNX 048918: BUS KNX 048918, BUSKNX048918, BUS /KNX 048918
![]()
Special presence sensors for work areas
Suitable for meeting rooms, classrooms, open areas, etc.
Ceiling mounted
360° passive infrared and ultrasound detection, range 8 m
IP 20
Consum 0.5 W
Optimum distance between two sensors: 6 m
Fixes directly in suspended ceiling with springs (supplied) or is installed in a 50 mm deep Batibox
Surface mounted on ceiling using accessory Cat. No 0 488 75
Connection by KNX red/black connector
Caracteristici generale
Lighting Management - BUS/KNX sensors
Constantly check for presence and light levels, switching OFF as soon as the natural light level is sufficient Switch ON and OFF automatically
Accurate set-up on site with configuration device
Connected directly to BUS/KNX cable (supplied with tap-off connector)
The detector must be programmed using ETS software
Denumiri similare la Senzor de miscare Legrand BUS/KNX 048918: BUS KNX 048918, BUSKNX048918, BUS /KNX 048918
Galerie
Prețurile și informațiile de pe paginile noastre sunt furnizate de magazinele partenere și au caracter informativ, unele erori pot apărea. Imaginile produselor au caracter informativ, uneori pot include niște accesorii care nu sunt mereu incluse în pachetul de baza. Informațiile aferente produsului (imagine, descriere, preț) se pot schimba fără notificare prealabilă. Compari.ro nu își asumă responsabilitate pentru eventualele greșeli.
